• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is a fantastic option for modern homes. They are durable, long-lasting and easy to maintain. They do not decay or rust as aluminum or timber.

Cleaning and lubricating regularly UPVC windows and doors is vital. This will save you from costly repairs and increase energy efficiency.

1. Broken Glass

The damaged glass in your windows can cause severe damage to your home and may even be fatal. It is important to take the time to make sure that you're doing all you can to keep your windows in good shape.

For single pane windows, it is relatively easy to replace them, and the replacement will generally fit within the frame of the previous one easily. However when you have double-pane windows that are held in place by internal beading, it will be more difficult to get rid of the old panes and put in new ones. In this instance, it is necessary to purchase plastic spacers in order to make sure that the new pane fits into the window frame.

Wearing eye protection and thick gloves is a must if you plan to remove the glass by yourself. It is also recommended to lay down a drop cloth before you begin working on the glass to ensure that any shards fall onto the fabric rather than on the floor where they can be trampled on and cause further damage.

Once the glass has been removed, it's a good idea to cover the gap with some clear packaging tape or duct tape to prevent drafts and water from entering the property until a professional comes out and repair the window. It also acts as an obstacle to stop intruders from getting into your home. If the gap between the window and the door is substantial, you may prefer a security screen that also has an opening. This will provide the best of both.

2. Sagging

Upvc windows and doors are a low-cost energy efficient, durable and long-lasting alternative to timber windows with sash. However, over time, they are susceptible to a range of problems including sagging. A window repair that is sagging can cause problems with light, draughts and even security. If you find that your uPVC window is beginning to sag it's important to act quickly to prevent the problem from getting worse.

To fix a sagging window you can try repositioning the hinges. To accomplish this, you'll need open the window so that you can access the frame. You can then unscrew both the hinges at the top and bottom using a screwdriver, and then adjust the hinges clockwise or counter-clockwise. Once you've adjusted the hinges, shut your window and check for fit. If you're satisfied with the fit, you can tighten the screws to ensure that they stay in place.

If you are unable to reposition the hinges, you might require replacing the seal. Seals made of rubber can dry out and lose their elasticity with time, leading them to loose their elasticity. If this happens, it's essential to replace the seal as quickly as you can to ensure that your upvc window Repair windows are waterproof and draught-proof.

upvc window repair near me handles could also become loose. This is usually due to screws that have become undone over time, but it could also be due to the handle mechanism wearing out. It's relatively easy to fix a loose uPVC handle. The first step is to close the window and perform an initial test fit. The corner joints of the sash need to align with the casing joint. If it does not then you can use the screwdriver to loosen the handle. Then turn the mechanism to position.

3. Water Leaks

If you're waking up to damp floors and mouldy walls each time it rains it's crucial to take action. The leaks of water from windows do are not just a cause for destruction of your home's structure but also undermine your efforts to regulate the temperature inside your home. The most common reason for leaking uPVC windows is that the sealant around the frame is either damaged or not present.

This is an easy fix that can be completed by any DIYer who has the ability. Depending on the severity of the issue is, the old caulking may need to be removed. It is important to keep in mind that when it comes to uPVC window repairs, you should avoid the temptation to "over-caulk in order to make the area harder to clean and could reduce the efficiency of your energy.

It is essential to ensure that any drainage holes are clear of debris and that the sill pan is placed correctly so that it drains away from the window. In more serious situations, you might have to consider replacing the window.

Moldy sills and rotten ones are other signs of water leakage. The fungus thrives in humid conditions and can propagate quickly throughout the house.

It is also important to remember that if the leakage is coming from between the glass of your double-glazed windows it may be more likely to be a problem with the glass seal rather than the frame or sliding. A uPVC specialist can easily solve this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or are loose and blow open with ease, it may be the hinges that are at fault. Anyone with the skills to fix them can replace these in a matter of minutes.

Almost every household in the UK will have top-hung or side hung uPVC windows that have hinges and, just like any mechanical component they can wear down over time. It is very easy to change the hinges on a window however it is easier if someone else helps you hold the frame.

It is also important to ensure that the uPVC hinges are opening and closed in the correct direction. You can check this by looking for the arrow on each hinge. This indicates which way the window repair near me should be opened.

The issue can be caused due to opening the window in the wrong way or due to a poor installation at the factory. This issue can be fixed by sending us a photo through our website and we will be happy to give you advice.

It is also essential to lubricate the hinges regularly. This can be done by applying an oil that is light in nature to the hinges, we recommend using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regular lubrication will make the window easier to open and close. It can also reduce the possibility of a window getting stuck and stop corrosion. Ideally, you should do this once a year. WD40 and other solvent-based lubricants are not recommended as they can damage your upvc window repair near me windows.

5. Draughts

Draughts can be caused by different things. The hinges can also become unbalanced due to wear, which can cause a gap between the frame and sash. If they are damaged beyond repair, it may be necessary to have them realigned. The second is the interlock, which is located on the hinge of the window and can also become misaligned, again it is feasible to give them a clean but in some instances it could be necessary to have these replaced.

The second most frequent reason for draughts are the window seals, these are prone to wear or damaged over time and let air escape through the gaps. This can be prevented by replacing them with high-quality weatherstripping. Another alternative is to replace the upvc window with low-emissivity glass. this will help in regulating indoor temperatures and again will lessen draughts.

One of the most effective ways to cut down on the draughts in your home is to use a draught excluder. These are usually fabric tubes that are filled with some kind of filler. They can be put on the windowsill on top. They can keep your home warm by blocking out cold air.

With a little regular maintenance and repairs your windows made of upvc will provide excellent security and insulation for your home. It is essential to remember that all windows eventually get worn out and it is cheaper to replace them than to repair them. If you are having issues with your upvc windows, it's best to seek professional assistance immediately.