• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

UPVC Replacement Door Handles

The handles on your doors wear out with time and require to be replaced. When replacing them, it is crucial that the new handles conform to the critical dimensions of the previous handle.

The three measurements you need to examine are the top screw's position, lever and key hole sizes. Use the size guide to assistance in this.

Inline Lever/Lever

A lever handle is a modern-day door handle designed to work with new or replacement doors. This kind door handle is available in a variety of styles & finishes. A number of manufacturers make this handle, including Avocet ERA, Fullex, Hoppe, Mila, Millenco & Yale.

Fab and Fix Windsor Inline Sprung Lever Door Handle

The uPVC/Composite handles are made from robust materials, and are ideal for multi-point lock doors that require a robust design. The handles are inline and use the same screws and spindle to fix them. They are easily fitted on a new or existing uPVC/Composite patio door handle locks.

The handle can be positioned and angled to suit any user. The handle has been endurance tested to 200,000 cycles, this will ensure the quality of the finish as well as the performance of the handle over time. The lever that springs is adjustable to fit a wide range of locks. This is particularly useful for narrower doors where the cylinder is further back in the door. A lever that is shorter can be used on doors with a latch which can be operated with the thumb located on the inside.

Lever Pad

The lever pad upvc handle is different from the lever handles found on most doors. These handles are operated by a single spindle or by two spindles, inline or offset. They are commonly employed on UPVC doors with double glazing. They come in a range of finishes and variations.

The handles are available in a variety of finishes, including White, Chrome, and Gold. The finish is BS EN 1670 Grade 5 and is resistant to corrosion. This gives the handle an outstanding performance and durability for its intended use.

All UPVC handle lever pads include a spindle and screws and can be mounted on a uPVC door. The backplate fixing centers of 211mm allow for a larger handle, which can often be a benefit when replacing a damaged or worn multi point door lock mechanism. The levers for these handles have springs, which can solve the problem of door handles that move out of their horizontal position when not in use.

When choosing a replacement UPVC handle and spindle it is important to match the PZ dimensions of the multipoint lock as well as the uPVC door. This measurement is also called the 'handle centre' or 'cylinder centres which is a crucial aspect of matching up the correct handles.

Once you have decided on the proper PZ size it is important to ensure that the lever and push pads are designed to match the American with Disabilities Act compliant handles you require for your door. These are typically round or square, with an internal lever and an external push pad.

The majority of UPVC lever pads we sell are sprung, meaning that they will return to their horizontal position after not being used, instead of hanging out and possibly sticking in the frame. This stops draughts from entering the property. The majority of UPVC lever pad style handles are available in left and right handed models that allow them to be placed on either side of the doors.

Euro Cylinder

Cylinder locks are commonly used on uPVC doors, but they can also be found on other types of door. The cylinder lock operates by a key which unlocks the cylinder's casing. The case is then able to reveal pins that can be aligned to the pins in the lock, allowing them to rotate the revolving camera, opening the door. Euro cylinders can be equipped with up to six pins with both internal and external doors typically having different levels of security.

The selection of a cylinder is crucial. It's dependent on the use that your doors and handles receive. Doors that are external door handles and locks, for instance, should be fitted with cylinders that are more secure, whereas doors inside can be secured with a standard cylinder. Additionally, certain cylinders are available with extra features that can improve security, for instance anti-drill and anti-bump characteristics.

A euro cylinder needs to be measured accurately to ensure it is the right size for your victorian door handle. The cylinder should be measured from the hole in the center of the fixing screw to the end of the cylinder and the thumb turn if you have one. If you cannot measure using the lock in its position, you can take it out of it. A cylinder that protrudes beyond the handle and escutcheon might be vulnerable to attacks such as snapping locks, therefore it is essential to make sure it's not too long.

Most modern cylinders are constructed with bump and anti-drill features included in their design. These features are designed to minimize the chance of a attack by causing the cylinder to rotate in the opposite direction. This helps stop the attack and keep your doors safe.

Some cylinders are designed to resist snapping. This is a more frequent method of attack on cylinders, which is where the break line of the lock is smashed with a special tool to snap off the front of the cylinder and allow the door to open. This is a faster and more convenient method of gaining access than using a multipoint locking window handles system. It also leaves less evidence of the break-in which can delay insurance claims.

Spring Cassette

The spring cassette is located in the base of the door handle backplate, supplying a spring-loaded solution and returning the multipoint lock handles back to their normal position after using. In the past, a lot of handles of this kind didn't have a spring built into them and without this they are more likely to slide or 'drop' once the locking mechanism has been disengaged. Adding this simple component is one of the best methods to correct this and it is also a great way to prevent your doors made of upvc from getting stuck in an open or closed position, since they are not always easy to close manually.

These spring cassettes have been specifically designed to be used with sprung multipoint locks They will not work with unsprung multipoint handles and you will need to have a bespoke hole cut into your backplate in order for them to fit (please see image for technical diagram). They are a replacement for existing damaged or missing cassettes inside the door handle backplate of numerous kinds of uPVC doors. They feature an elongated square that can accommodate an 8mm spindle, and are sold as a set.

These spring cassettes are a fantastic value-for-money solution to the issue of your door handles sliding. These spring cassettes are easy to install and will increase the life of your uPVC door. Please contact our team to learn more about our range of uPVC accessories and spares. We are always ready to provide expert advice and support you.