• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Properly Start a Wood Burning Stove

Wood stoves are a warm way to heat a room and conserve energy. However, they need an amount of care.

A majority of modern wood stoves comply with EPA emissions guidelines. Look for an EPA sticker either under or on the grate to make sure your stove doesn't create lots of harmful pollutants.

How to start a small wood burning stoves uk Fire

The smell and the sound of a fire can be an excellent addition to any house. But it's important to learn how to properly build a fire in your stove. Improper techniques can result in the fire not to burn efficiently, and produces creosote or smoke. The tips below will assist you in starting a fire that will heat your home with minimum effort and ensure your safety.

Before you start a fire, you should check the condition of your coals and logs. If they're too damp, they will smother the fire and prevent it from burning properly. It is also possible to open the flue to let out any ash that has been deposited into the stove.

Begin by placing a handful of small wood burning stoves, dry pieces of newspaper in your stove. This will help ignite the tinder and kindling. Once these begin to burn, add a layer of larger pieces of kindling to the top of the pile. This should be done with the crosshatch pattern to ensure that there is air between each piece.

If your wood stove comes with an automatic combustion control it will automatically feed air to the fire as it expands. This allows the fire to burn for a long time without having to open the door of your stove often to keep it in check.

It's important to avoid using too much tinder, as this could result in an unburned fire that burns at a high rate and doesn't make use of the fuel as efficiently as it can. Once you've got a good bed in your stove of tinder, kindling and embers to start the main flame, you can do this by laying two large logs of the base on the grate. Then, on the top of these base logs, place a layer perpendicularly to them. This method of creating an ember called a "top-down" fire will result in a powerful and long-lasting fire that doesn't engulf the larger base logs.

Close the damper when your fire is established and keep it closed. The fire may be smothered if you open the damper before it is fully established. It will also reduce the effectiveness of the fire.

Add Wood

Stoves can be used to efficiently heat your home and help you save money. They can be used in conjunction with central heating systems or furnace to provide supplemental heat in large houses. A lot of the stoves that burn cleanly available on the market use advanced combustion technology that separates the burning volatile compounds from combustible gases and tar. This is achieved by supplying air in two different stages. The first stage is for the vaporization and the second is to supply fresh air that has been pre-heated. This improves combustion and reduces the odors.

The amount of heat you will get from a stove will depend on the type and amount of moisture of the wood used, and also the size of logs. The logs should be stacked in a ventilated area for several months before you attempt to burn them, to give the wood time to dry out. If the logs are not dry enough they will release plenty of steam that is basically wasted energy.

During the burning of the fire, it is recommended to add more wood to the stack in intervals, but not all at all at. The addition of too much wood at once can cause the temperature to rise in the firebox, creating a vortex which pulls smoke and unburned volatile compounds back into flames. This could decrease the effectiveness of your stove.

Avoid using other combustibles in your stove, like paper or cardboard because they are not wood. They have different physical properties and can't be burned without producing dangerously high temperatures. Also, avoid using compressed combustibles like wood briquettes as they have a very different chemical and physical composition to real firewood and aren't type-approved for woodburningstoves burning in wood burning stoves.

It is crucial to have a professional install and test your wood stove. A certified WETT technician can test your installation to ensure that it is safe and efficient. They can also make sure that your chimney works correctly. They provide maintenance services for your chimney and stove to keep them in top condition. They can inspect the accessible areas of your chimney for leakage, and fix any issues found. They will also make sure that the occupants of the house are aware of and follow the evacuation procedure in case of an accident.

Adjusting the Damper

A damper regulates how much heat escapes to the chimney when you're not cooking on your stove. Additionally, it can also help manage the fire. If the flue opens, but the damper is too closed the fire will not be able to burn as it should and smoke will billow into your home. To ensure you have the best fire with your damper set correctly, you have to test different locations and observe how each affects the flames.

Typically, you should keep the damper open enough to let air in and out of the flue when a fire is burning. This allows the fire to get going and keeps it in good shape so that you can enjoy it for a long time. The right opening can stop the fire from being starved of air and stop it from blowing smoke.

To be able to adjust your damper you need to first make sure the fireplace is heated and the contemporary wood burning stove stove is hot. This will ensure that the chimney stays warm and has a good draft. Once this is accomplished, the wood stove damper may be adjusted.

Once the fire has smolder a bit you should reduce the damper to around three-quarters of its full position. This will prevent warm air in the room from escaping into the chimney, while still allowing smoke to escape.

This is the best way to keep your fire lit and to prevent it from becoming too hot. The draft might be stopped if you shut the damper to far but a cold wind could be able to enter your home in the event that the damper is not closed.

You can determine how much the damper is open by placing your hand on the top of the of the flue pipe. If you feel a breeze pushing against your hand, the damper is likely in an open position.

The damper settings can differ slightly from one stove to another and even between different kinds of wood. You can play around with different settings to get a sense of the best setting for your stove.

Clean up

It is essential to clean your chimney and stove after an incident. This will reduce the risk of an ensuing fire in the chimney which is the most common cause of fires that are caused by wood stoves. Creosote, a sticky substance that builds up on the stovepipe's interior and is extremely dangerous. It is caused by the moisture and wood particles that are not burned that are unable to escape from the fire. It can also happen when fires aren't properly lit.

A regular cleaning schedule can help prevent the buildup of creosote. This can be done by sweeping your chimney at least once every year. It is recommended that you have your stove and fireplace professionally inspected and cleaned at least once per year.

It is also an excellent idea to clean out the ash tray and grate regularly. It is recommended to use only wood that is seasoned for burning, as this will result in less creosote and ash. Avoid burning paper, cardboard and plastic. These can release chemicals that are dangerous for the respiratory tract and the air, and could be released into your home.

It is also necessary to clean the glass of the wood stove on a regular basis. Many newer cheap wood burning stove stoves are designed with self-cleaning glass, which means they don't require a lot of cleaning. If you are not able to get the glass on your wood stove as clean as you would like There are stove glass cleaners available that can be used on the window.

Other helpful tips to maintain your wood stove include turning the vent down when you're not using it, and opening a window or door to increase air flow. This will ensure that the fire is burning more hot and efficient. The wood stove will not need to be as active to circulate air. It is also a good idea not stack logs or leave them in the flame for long durations of time, since this could lead to splitting and warping. It is advised to avoid using combustible compressed wood in your wood stove since the paraffin contained within the wood can melt and then flow into the flue, which could cause damage.