• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

UPVC Window Handle Replacement

It's easy to repair a damaged window handle with the right tools. But it's essential to know the type of handle and its spindle length before buying an alternative.

Older uPVC window handles have a spur that extends and is locked over a wedge striker. These can be right-handed or left-handed and must be matched when replacing.

What type of lock and handle do I need?

There are a myriad of upvc window locks and handles, each with its particular advantages and uses. The type of handle you have will determine how easy it is to open your windows and whether or not the locking mechanism functions according to the plan. Over time, and with regular use the handles made of upvc on your windows could get worn out and damaged. This makes them less secure and less effective. In some cases, they may even be completely removed. It is important to repair your window handles made of upvc as soon as you notice they are falling off. This will prevent possible break-ins, and keep your house safe.

It's a simple job that virtually anyone can perform. You'll require some basic tools, but with the appropriate knowledge, it's simple and should only take a couple of minutes. To get started you must identify the type of handle and lock you have on your window to help you to find the ideal replacement window handle.

Inline Espagnolette Handles

They are the most popular kind of upvc handle and are usually placed on the outside of your window. They are flat and feature an opening that engages the locking mechanism of the window frame. Inline upvc handles feature an elongated spindle that runs through middle of the handle to the window frame in order to control the latch.

Cockspur Handles

These handles are usually found on older uPVC window frames and feature distinct hook-shaped designs. Cockspur handles are held to the frame of the window by only one screw and are less secure than other types of window handles.

Handles that tilt and turn

In contrast to other upvc handles that are tilt and turn, these handles can be turned to open the window, and turned inwards to allow to let air flow in. They have a 7mm spindle in the back and are available both in right-hand and left-hand versions.

When purchasing glass replacement for windows handles made of upvc It is crucial to check the spindle length because not all handles are identical in size. To determine the length of your upvc handle simply drop something into the middle of the hole and then measure how far it extends before it comes into contact with an obstruction. This is the maximum size of spindle that will fit in your windows.

What is a spindle?

uPVC window handles operate similarly as doors. By turning the handle, you will be able to open a latch in the frame. The window can then be opened and shut. However, sometimes the handles may become damaged, particularly if they are regularly used or exposed to extreme weather conditions. This can leave you needing to replace your uPVC windows handles as they may not be able to operate the window in a proper manner anymore.

There are a variety of uPVC handle options, including Espag, Cockspur, and Spaded handles. They are made in a variety of ways to fit into uPVC frames. Each handle type utilizes a different spindle to lock the window mechanism. This is why it is crucial to know the type of handle you have on your uPVC window to get the correct replacement window handle for it.

The base section of the handle will tell the type of uPVC it is. There should be a'snap in cover over one screw that holds the handle's base in place. After removing this, you will be able see the second screw that holds the handle base in position. Once both screws are removed you should be in a position to pull the handle away from the uPVC window.

After removing the uPVC handle, carefully remove it from the locking mechanism. Make note of the length of the spindle, as you will need to ensure that you purchase one that is the same length as the original handle and locking mechanism.

The primary issue with window handles made of uPVC is that the spindle becomes worn out and cannot longer work with the locking mechanism. This could be due damage caused by constant use or a loosening of the locking mechanism or even rust over time. When this happens it is required to replace the window handle and locking mechanism to restore complete functionality to your uPVC windows.

How do I take off the handle that was previously attached?

Window handles are susceptible to being damaged or destroyed over time. It is important to repair them as quickly as you can to ensure your safety. It is simple to replace a worn or damaged handle. The job can be completed in less than an hour without the need for special tools.

To remove the handle, you first need to remove the screw that is located at the bottom of the handle. Once this is removed the handle will be removed from the base section. A second screw is located at the bottom of the handle. This can also be removed. Once both of these screws are removed, the handle can be removed completely from the base portion of the window.

Once the old handle is removed, take the new handle and line up the fixing holes with the holes that are present in the window glass replacements frame. There may be a little sticker or caps on the new handle, so take them off them if needed and then screw the handle in place. Once the handle is in place, it is crucial to verify that it is working by turning the handle, and ensuring that the lock mechanism activates.

Espag handles come with a spindle that protrudes from the handle and slots into a multipoint locking mechanism in the window frame. Cadenza windows feature a blade with cutouts that fit into the lock mechanism. Cockspur handles are long and hang over the frame of the window or the transom bar crossmember.

Once you have the new handle in place, you can insert the spindle into the lock inside the window and then tighten it. Once the handle is firmly fixed and secured, replace the snap-in cover and screw cap (if necessary). The handle is now ready to use by opening and closing the window a few times to check that it works properly and securely.

How do I put in the new handle?

The process of changing your window handle made of uPVC isn't difficult, and the process is quite simple. All you need is a screwdriver and small amount of patience. The first thing to do is make sure that the old handle is in the unlocked position and then take out any screws that are visible. you can replace them with screw caps if needed. After removing the handle, you will need to note the length of the spindle which extends from the back. This is important as it will determine the type of handle that you will need to buy.

Espagnolette handles made of uPVC are the most popular type of handle. The spindle runs through the handle to operate the locking mechanism inside the frame of the window. When the handle is turned it opens the latch on the window, allowing it to open. In regular use and over time, handles made of espagnolette can become damaged.

Cadenza handles are a form of uPVC handle that is typically employed with tilt and turn windows. They have an elongated blade that functions as a multipoint locking mechanism within the window. They are more secure than the espagnolette handles because they are able to open from the inside. They can be replaced by the same method as espagnolette handles but you will need to make sure that the new handle has an angled blade instead of a flat one.

Once you've decided on the correct handle to purchase You can simply place the new handle with the existing screw holes, and then screw it in the appropriate position. Then, you should put the screws on and test the new handle. You can accomplish this by moving the handle between the locked position to the unlocked several times. If you have any issues, it may be worth contacting a specialist to see if they are able to assist in resolving the issue. They can offer advice on how to resolve the issue in a quick and effective way.