• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are a fantastic choice for modern homes. They are long-lasting, durable and easy to maintain. They don't decay or rust as aluminum or timber.

Cleaning and lubricating regularly UPVC windows and doors is crucial. This will save you from unnecessary repair costs and improve energy efficiency.

1. Broken Glass

The broken glass in your windows could cause severe damage to your home, and could even be fatal. It is crucial to take the time to ensure that you're doing everything you can to keep your windows in good condition.

Single-pane windows are relatively easy to replace, and they typically fit into frames of the past easily. However, if you have double pane windows that are secured by internal beading, it'll be more difficult to remove the panes that are in place and replace them with new ones. In this situation it is essential to purchase plastic spacers to aid in fitting the new pane into the window frame.

Wearing eye protection and heavy gloves is essential if you plan to remove the glass yourself. It is also an excellent idea to lay down a dropcloth before you begin working on the glass, so that any shards will fall onto the fabric instead of onto the floor where they could be trampled upon and cause further damage.

Once the glass is removed from the window, it's best to cover the gap with clear packaging tape or duct tape to prevent water and drafts from getting into the home until a professional comes out and repair the window. It also acts as a barrier to prevent any criminals from getting into your home. If the gap is large, you may think about the security door with an integrated window, as it offers the best of both worlds.

2. Sagging

uPVC is durable, energy-efficient and affordable alternative to timber sash windows. As time passes, they may be affected by a variety of issues that include sagging. A sagging uPVC window can cause issues with light, draughts and even security. If you notice that your uPVC window is beginning to lose its shape, it is important to act swiftly to stop the issue from becoming worse.

To fix a window that is sagging you can try to reposition the hinges. To accomplish this, you'll need to open the window to access the frame. You can then unscrew both the hinges on the top and bottom with a screwdriver and adjust the hinges clockwise or counter-clockwise. Once you've adjusted the hinges, close your window and check for fit. If you are happy with the size of the window, tighten the screws to keep them in place.

If you aren't able to move the hinges, you might require replacing the seal. Seals made of rubber can dry out and lose their elasticity over time, leading them to lose their tightness. It is essential to replace your seal as soon as you can in order to ensure that your uPVC window watertight and draughtproof.

UPVC handles can also become loose. This is typically caused by screws that have been removed over time, but it could also be due to the mechanism of the handle wearing out. It's a good thing that it's simple to repair the handle of a window that is loose yourself. First, you'll need close the window and then perform an initial test to ensure that it fits. The corner joints of the sash should be aligned with the casing joint. If it does not then you can use the screwdriver to loosen up the handle. Then, you can turn the mechanism to position.

3. Water Leaks

If you're waking up to wet floors and mouldy walls each time it rains, it's important to take action. Water leaks from windows are not just a cause for degradation of your home's structure but also hamper your efforts to control the temperature in your home. The most frequent reason for leaks in uPVC windows is that the sealant around the frame is either damaged or is missing.

This is a relatively easy fix and should be undertaken by any skilled DIYer. Depending on how serious the issue is, old caulking may need to be removed. It is essential to remember that when it comes to uPVC window repairs you should not be tempted to apply too much caulk and then make the area harder to clean and could reduce your energy efficiency.

Check that any drainage holes are free of debris in them, and also that the sill pan has been angled correctly to drain away from the window. In more severe cases, you may need to replace the window.

Other indicators of long-term water leakage are sills that are rotten and the appearance of black spots of mold on the walls near the window. The fungus thrives in conditions of dampness and can spread quickly throughout the home.

It is also important to keep in mind that if the leak is coming from between the glass of your double glazed windows, it is more likely to be a problem with the glass seal rather than the frame or sagging. It is also possible to be corrected by a uPVC window specialist who will replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges may be to blame for the reason that your uPVC window is difficult to open or if it blows open with the breeze. Any competent DIYer can replace hinges in just a few minutes.

Like all mechanical parts, hinges can wear out over time. It's easy to change the hinges on a window repairs near me, but it's easier if someone helps you hold the frame.

Check that the uPVC hinges are open and closed in the correct direction. Check for the arrows on each hinge to determine the direction in which the window should be opened.

Faulty window hinges could be caused by improperly opening the window a certain way or by improper installation in the factory. Sending us a picture via our website is often enough to resolve the problem. We are always happy to offer suggestions.

It is also crucial to grease the hinges on a regular basis. Applying a light engineering lubricant to the hinges is an ideal method of doing this. We recommend using a lubricant that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It also helps prevent corrosion and decrease the chance of sticking. This should be done at least once a year. WD40 and other solvent-based lubricants should not be used since they can cause damage to your uPVC windows.

5. Draughts

Draughts can be caused by different factors. The hinges, also due to wear and tear may become displaced, which will cause an opening to appear between the sash and the frame. If they are damaged beyond repair, it could be necessary to have them realigned. Second, the interlock can be disaligned. This happens on the hinge's side, and might require to be cleaned. In some instances it is possible to replace the hinges.

The next most common reason for draughts are the window seals. They are susceptible to being worn out or damaged over time and let air escape through these gaps. Replacement of these with high-quality weatherstripping can help stop draughts. Another alternative is to replace the upvc window with low-emissivity glass, which will help regulate indoor temperatures and again will lessen draughts.

The last way to reduce the amount of draughts is to use a Draught-exclusion device. These are usually made of fabric tubes filled with a filler, which can be put on top of your window sill. They will keep your home warm by blocking cold air.

Your windows made of upvc will keep providing excellent insulation and security in your home by performing regular maintenance and repairs. However, it is important to recognise that all windows have a lifespan and eventually, they will reach the point when it's more efficient to replace them than fix them. So, if you are having issues with your upvc windows, it is recommended to seek assistance from a professional immediately.