• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is a fantastic choice for modern homes. They are easy to maintain and are durable and long-lasting. They do not get rotten or rusty like timber and aluminum.

Cleaning and lubricating regularly UPVC windows and doors is essential. This will help avoid unnecessary repair costs and improve energy efficiency.

1. Broken Glass

The broken glass in your windows could cause serious damage to your home, and could even be fatal. It is crucial to take the time to make sure that you're doing all you can to keep your windows in good shape.

For single pane windows it is relatively easy to replace them, and the new window will generally fit within the old frame very easily. If you have double-paned windows which are joined by internal beading, it will be difficult to remove and replace the panes that were previously in use. In this instance, you will need to locate some plastic spacers to aid the new pane in being able to fit correctly into the frame of the window.

Wearing protective eyewear and thick gloves is essential when you are planning to remove the glass by yourself. It is also recommended to lay down a drop cloth before you begin working on the window panes so that any shards fall on the fabric and not onto the floor which could cause them to be trampled under.

It's a good idea to tape the gap once the glass has been removed. This will keep drafts and water from getting into your property until a professional is able to repair the window. It also acts as a barrier, preventing any intruders to gain access into your home. If the gap is large, you may want to consider using a security door that has an integrated window, as it will provide the best of both worlds.

2. Sagging

uPVC windows and doors are an affordable energy-efficient, durable and long-lasting alternative to timber windows made of sash. However, over time they may be afflicted by a variety of issues like sliding. A sagging upvc window repair near me windows could cause issues with light, draughts, and even security. If you notice that your uPVC window is beginning to shrink, it is important to act swiftly to prevent the problem from worsening.

Repositioning the hinges can aid in fixing a window that is sliding. First, you'll need to open the windows so you can get at the frame. You can then unscrew both the hinges on the top and bottom with a screwdriver and adjust the hinges clockwise or counter-clockwise. After you've repositioned the hinges, shut your window and check for an appropriate fit. If you are happy with the size of the window, tighten the screws to secure them in place.

If you are unable to reposition the hinges, you could have to replace the seal. As time passes, rubber seals lose their elasticity and become dry and cause their tightness to decrease. It is crucial to replace your seal as soon as you can to keep your uPVC window waterproof and draughtproof.

uPVC handles can also loosen up. This is often caused by screws that have become undone over time, but it could be due to the mechanism of the handle wearing out. Fortunately, it's easy to repair the handle of a window that is loose yourself. First, you'll need to close the window and then perform a test fit. The corners of the sash need to be aligned with the casing joint. If it isn't, you can use a screwdriver to loosen the handle and turn the mechanism back into position.

3. Water Leaks

If you're waking up to wet floors and mouldy walls each time it rains, it is important that you take action. Water leaks from windows are not just a cause for destruction of your home's structure but also undermine your efforts to control the temperature within your home. Most often, uPVC window leaks are caused by a damaged or missing sealant.

This is an easy fix that can be accomplished by any DIYer who has the ability. Depending on how severe the issue is, the old caulking may need to be removed. It is important to remember that when it comes to uPVC window repairs, do avoid the temptation to "over-caulk' as this will only make the area more difficult to clean and could reduce your energy efficiency.

It is essential to ensure that the drainage holes are free of debris and that the sill pan has been angled properly so that it drains away from the window. In more serious cases, you may need to replace the window.

Mold spots and rotten sills are another sign of water leakage. This fungus thrives in humid conditions and can propagate quickly throughout the home.

It is also important to remember that if the leakage originates from the glass in your double glazed windows, it is more likely to be an issue with the glass seal, rather than the frame or sagging. This can be easily fixed by a uPVC window specialist who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be at fault when your uPVC window is difficult to open or if it opens in the breeze. They can be easily replaced by any competent DIYer and can be done within a few minutes.

Nearly every home in the UK will have either top hung or side-hung uPVC windows that use hinges and like any mechanical part they can wear down over time. It's easy to change a window repairs hinge, but it's easier if someone else helps you hold the frame.

It is also worth checking that the uPVC hinges are opened and closed in the correct direction. Check for the arrows on each hinge to determine which way the window should be opened.

The issue could be caused by opening the window incorrectly or by a poor installation in the factory. This can often be resolved by sending us a picture through our website and we will be pleased to offer you advice.

Regularly lubricating the hinges is also necessary. Applying a light engineering lubricant to the hinges is a great method to accomplish this. We suggest using a lubricant that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It can also lower the possibility of a window sticking and prevent corrosion. This is recommended to be done at least once a year. WD40 and other solvent based lubricants are not recommended as they could damage parts of your uPVC window.

5. Draughts

Draughts in Upvc windows can be caused by various factors. The hinges can also become disaligned as a result of wear, which can cause a gap between the frame and sash. They can be repaired by giving them good clean, but when they're beyond repair, it may be necessary to get them re-aligned or replaced. The interlock may also become unbalanced. This happens on the hinge's side and could require to be cleaned. In some cases, it may be necessary to replace them.

The seals may wear out or get damaged over time, allowing air escape. Installing high-quality weatherstripping can help stop draughts. Replace the windows made of upvc with low-emissivity lenses. This will help control indoor temperatures, and reduce the possibility of draughts.

Lastly, one of the most effective methods to reduce drafts is to use a draught excluder, these are typically fabric tubes which are filled with a sort of filler and can be placed on the windowsill on top. They will keep your home warm by blocking cold air.

The windows made of upvc can remain a great source of insulation and security for your home with a little regular maintenance and repairs. It is crucial to realize that all windows have a lifespan and eventually, they will reach an point at which it is more cost-effective to replace them rather than fix them. So, if you're experiencing issues with your Upvc windows, it's recommended to seek assistance from a professional as soon as you can.